Drilling Machine Type MBO
for the production of foam paint rollers
- The foam block is put onto the conveyor belt and pulled-in by the machine
- in the spraying unit the surface of the foam block is sprayed with a non-silicone-containing slip additive
- interior and exterior diameter of the roller are being drilled at the same time
- in case of a drilled through interior diameter the cores could be blown out in this unit
- in the pluck-out unit the inner cores are being torn out and ejected
- at the removal unit the drilled holes must be controlled and the foam block can be transported on to a gluing machine connected thereafter via a roller transport
Features
- maximum economy
- high flexibility
- simple operation
- high capacity
- production security
- very low change-over time
Technical data
with roller length 100 mm
| Capacity | up to 3000 resp. 6000 rollers per hour* |
| Material dimensions | height max. 185 mm width 300 mm resp. 500 mm length 2500 mm |
| Drill | ext. diam. 34 - 38 mm ** int. diam. 14 - 18 mm** |
| Drives | infinitely variable |
| Power supply | 400 V / 50 Hz |
| Air supply | 6 bar |
| Control | pulse motor control with PLC and touch screen |
| Accessories | spray unit SPE-500 |
* depending on the material, foam block width and roller length
** different diameters upon demand
